Military Lighting
Military Vehicle Lighting
Dual Mode, NVIS, NVG Green A, Blue, White, Red, and More
Looking for the best construction and optimized lights for Military vehicles of any kind, or heavy duty vehicles in general where Night Vision Goggles are used? Then look no further than our specially designed and heavy duty products made for these tough 28 Volt types of environments. This includes Military infrared lighting for vehicles. Whether a product is needed for land, air, or sea applications, Blue Wolf products are specifically designed to meet these conditions and are USA Made. For over a decade now, Blue Wolf has provided products to Worldwide manufacturers such as General Dynamics, Boeing, Lockheed Martin, BAE Systems, Airbus, Textron, and more.
​
The following are some of our most popular lights - or go here for more products.
For more information on GSA Capabilities click here.
MILITARY
Cage Code: #6PQC4
DUNS: 02-668-1220
Blue Wolf Develops Dual Mode Directional Map Light for Military Applications Using Night Vision Goggles
Blue Wolf’s Dual Mode Directional Map light comes with a standard White (4K 90 CRI) primary lighting color, and a secondary color choice of NVIS White, NVG Green-A, red, or even blue colors. The map light has an extra firm 10" flexible gooseneck for heavy military use applications, flexible light positioning, and full 0 to 100% dimming control. The head of the map light is also fully rotatable from 0 to 340 degrees for easy directional light placement. It is designed for illuminating instrumentation, crew desk areas, or small cargo bay areas such as those found in aircraft, tanks, boating vessels, or other military use applications.
BW-A510-XXX Dual Mode Directional Map Light page
​
Dual Mode Tactical Dome Light
Our BW-A480-XXX Dual Mode tactical light is great for applications that require 2 different colors of internal lighting (such as NVG Green A and White), or a single color if desired. This light can also go to a preset "Tactical" light output level when activated. For example when a hatch door opens or when operations require low light tactical mode. For more information see the
BW-A480-XXX Dual mode dome light page
Additional Info:
​
-
Light Options: White, NVIS White, NVG Green, Red, Custom
-
Single Mode Lighting Area or Dual Mode Area
-
Black anodized aluminum finish
-
Operating Temp -40 to +50C
-
MIL-STD-1275D Tested
-
MIL-STD-461G Tested
-
MIL-STD-810G Tested
-
IP68 Water proof
-
Black Out Mode
IR Brake / Tail Lights (940nm) IR Head Lights
Our BW-A415-IR Brake/Tail/IR lights are great for "follow me" type lighting situations. Has Brake "red" and a dimmer "red" for tail lights. The light also includes an IR lights that can be used for covert operation when using Night Vision Goggles. For more information see the BW-A415-IR Brake Tail Light page
or BW-A370 IR Signature Light page
or BW-A520 Dual Mode Head Light page
Additional Info:
​
-
Material: Anodized Black 6061-T6 Aluminum
-
Hard Mount
-
DOD-160 section 8 compliant
-
MIL-STD-810G compliant
-
IP67 water rated
Heavy Duty Gooseneck Map Light
Our BW-A125 Heavy Duty Rotating Head Map light (in NVIS White, NVG Green A, or standard White) is great for small areas that require personalized lighting. Fully dimmable from 0 to 100% with a flexible head and a full 340 Degree rotating head for perfect orientation along with tactile feedback when dimming. This light is standard with a MIL-DTL-D38999/20 connector
but can be ordered without the connector as well.
​
For more information see the
BW-A125-RH Heavy Duty Map Light page
Additional Info:
​
-
Operating Voltage: 28 Vdc Typ.
-
Operating current: 100ma
-
Operating Temp -40 to 122 Degrees F.
-
Designed for HD Military Use
-
Dimmable from 0 to 100%
-
NVIS Compliant MIL-STD 3009
-
Reverse & Overvoltage Protection
-
DOD-160 section 8, CAU U, Figure 8-7 Compliant
Expeditionary Lighting Kit (ELK)
Trimode Lighting with White, NVG, and IR
In one light with zoned dimming control
An Easy Way to add portable lighting to any mission critical application
White
NVG/NVIS
Infrared
For More Portable NVG Lighting Info - Click here
ELECTRICAL DESIGN
At Blue Wolf, we provide a broad range Product Engineering and Prototyping Services. This includes Mechanical and Electrical Turn-Key design services. Our solutions are innovative and economical, while at the same time being based on industry knowledge and key manufacturing processes.
PAST PROJECTS
Blue Wolf is a full-service product development, Engineering, and Prototyping company based in beautiful Boise Idaho. By looking at some of our past projects it’s easy to see that most new designs incorporate various forms of mechanical, electrical, PCB Design, and firmware integration.
